Automation and robotization of production

We build and integrate robotic stations, especially for the industry related to material removal and surface finishing

Constraction and integration of robotic stations

We help our clients automate machining processes by implementing appropriate programming solutions as well as building and integrating robotic stations. We specialize in the automation of processes related to milling, grinding, deburring or replacing details on machining centres. Thanks to over 20 years of presence on the market and the possibility of cooperation with companies representing various industries, we can boast of extensive experience, which is invaluable when designing solutions that meet the needs reported by our clients.

Robotization of material removal and surface finishing

In a manufacturing company, competitiveness and stable development are achieved thanks to the automation of processes, precision, repeatability, resistance to difficult working conditions, high efficiency and the possibility of continuous operation. For many decades, industrial robots have met these requirements and now play a key role in the implementation of the concept of Industry 4.0. In the automotive and electronics sectors, industrial robots are already essential for the smooth functioning of production processes. They include not only traditional tasks such as handling, welding, cutting, palletizing or packaging, but are also increasingly used for robotization of milling, grinding, deburring and replacement of details on machining centres.

If your company needs support in implementing a project to implement robotic workstations, specialists from SOLIDEXPERT are ready to help with digital transformation and the implementation of the industrial revolution 4.0. The company specializes in the construction of robotic stations for the processes of material removal and surface finishing. We invite you to cooperate with us!

Why should you trust us?

SOLIDEXPERT is a company operating on the Polish market since 2002. We are an Authorized Reseller of SOLIDWORKS, CAMWorks, 3DEXPERIENCE, WOODEXPERT and Microsoft solutions in the area of CAD/CAM/CAE/PDM and ERP. We also conduct technical training and provide services for the industry, i.e. audits, CAD/CAM/ERP implementations, integration of CAD, PDM, ERP solutions, numerical calculations, preparation of post-processors, CNC machining. Our employees are the best engineers with great technical knowledge and experience. Thanks to cooperation with over 3,500 enterprises, we have learned about the problems and challenges faced by our clients. In response to them, we create our own software solutions and provide services that support Polish enterprises on their way to success. We believe that the combination of our technical knowledge and gained experience is the key to development and customer satisfaction!

Check out why we are reliable partner!

21 years of experience

Such a long presence on the market has allowed us to learn about the various challenges that companies face

3,500 customers

A rich portfolio of clients has provided us with valuable experience for cooperation with a wide range of industries

18 services

We provide software solutions and provide services to streamline processes in enterprises

Over 100 employees

Our team includes the best technical specialists, implementation specialists and integrators who offer their experience and expert knowledge

What does the construction of robotic workstations look like?

The construction of robotic stations is a process that requires an individual approach to each client in order to meet their unique expectations and guarantee the highest quality of services. Our company is able to automate various processes, such as milling, grinding, deburring, machine handling, palletizing, pick & place, welding and welding.

Find out how we work!

During the construction of robotic workstations, we use:

  • SOLIDWORKS while creating a mechanical design of the station
  • SOLIDWORKS Electrical by creating an electrical design
  • FANUC RoboGuide and Eureka Robot for simulation and offline programming of robots
  • and we program and configure PLC, HMI controllers and drives from leading manufacturers – SIEMENS, ALLEN-BRADLEY, MITSUBISHI.

The process of building and integrating robotic stations can be divided into several stages.  SOLIDEXPERT participates in each of them. Participation in the entire process, from the beginning to the very end, allows us to guarantee the highest quality of implementation! Below we present the stages of activities we carry out.

Customer audit

We analyse the requirements and expectations of the client in order to be able to propose an optimal solution.

Design of a robotic station

After the audit is completed, we create a plan for the construction and implementation of a robotic station along with an estimated cost estimate and a schedule of activities.

Start-up of a ready stand in our hall

Based on the created design of the stand, we assemble it in our plant in order to run it and verify the correctness of the proposed solutions.

Control of the correctness of the process and cycle time

During the start-up of the station, we monitor the correctness of the processes and check whether the cycle time is optimal and consistent with the established assumptions.

Acceptance of the station

We present a report on the launch of the station, on the basis of which the client agrees to its final form.

Installation of the station at the customer's site

We carry out the installation of the station at the Customer’s location in accordance with the approved plan.

Training of station operators

We conduct a service course for operators of a new robotic station.

Process optimisation

After the assembly of the station at the customer’s, we optimize processes to ensure that the installed workstation meets the highest customer requirements.

Technical support and service

After completing the process of implementing a robotic station, we offer our customers after-sales support, including technical assistance and maintenance services

Take advantage of the robotization relief in 2023!

In 2023, a relief for robotization is available. Companies that decide to invest in the automation and robotization of production processes can take advantage of the tax relief. Deduction from the tax base of 50% of eligible costs related to investments in robotization applies to:

  • purchase or leasing of new robots and cobots,
  • software purchase,
  • purchase of accessories (e.g. tracks, rotators, controllers, motion sensors, end effectors),
  • purchase of occupational health and safety (OSH) equipment,
  • training for employees who will operate the new equipment,
  • launching trial production and introducing a new product to the market,
  • research and development activities in the company.

We invite you to choose SOLIDEXPERT as an implementation company and take advantage of the relief. This is the perfect time to invest in this area and secure a competitive advantage on the market.

See who we work with!

Industries supported

Transportation

Aviation and Defence

Machinery and equipment

Hi-Tech

Consumer products

Medicine

Architecture

Metalworking

Wojciech Kowalczyk CNC and robotics manager

Is your company interested in cooperation?Contact us!

12 626 06 00

SOLIDEXPERT POLSKA SP. Z O.O.
ul. Gabrieli Zapolskiej 44, 30-126 Kraków
fax. 12 626 00 92, office@solidexpert.com
NIP 6772380230, REGON: 123060159, BDO: 000329881

  • Od 2002 roku nawiązaliśmy współpracę z 3500 firm
    i przeszkoliliśmy ponad 9500 osób

  • We are winners of many industry awards
    e.g. for the best customer service

  • We have numerous certificates confirming our competences

    The administrator of personal data is SOLIDEXPERT Polska Sp. z o. o. based in Cracow. We will use your personal data to call you back or write back to answer your inquiry. We will process the data in accordance with the Privacy Policy. Tick the consent below if you want to receive promotions, newsletter from us. We will then process your data also for marketing purposes. You can withdraw your consent at any time by writing to biuro@solidexpert.com

    Usługa współfinansowana w ramach projektu „Inteligentna Super Fabryka – ISF 4.0 KOM2”
    współfinansowanego w ramach Programu Operacyjnego Inteligentny Rozwój, oś priorytetowa: „2 Wsparcie otoczenia i potencjału przedsiębiorstw do prowadzenia działalności B+R+I”,
    działanie: „2.3 Proinnowacyjne usługi dla przedsiębiorstw”, poddziałanie: „2.3.3. Umiędzynarodowienie Krajowych Klastrów Kluczowych”

    Strona solidexpert.com zbiera dane użytkownika, personalizuje działania marketingowe z pomocą internetowych plików Cookies. Dowiedz się więcej